|
Prerunner Kits at a Glance:
-
Completely Bolt On Kit
-
More Travel & stronger components than Ford Raptor
Description:
The ultimate choice between daily driving and serious offroad use. These long travel kits perform phenomenal on the street and have 13" of long travel and incorporate a KING Coilover shock for offroad use. If you already own a 2WD F150 and have been looking at the Raptor this is the kit for you. This long travel system has more travel than the raptor and allows you to have a crew cab. Raptor is only offered in an extended cab version but with a Baja Kits long travel you can have a crew cab Raptor Killer. As always using 100% CAD design for the optimum travel, geometry and aesthetics. Coming from building trophy trucks and class 1 cars gives us the edge that was needed to come up with the ultimate kit for your F150. Also completely bolt on, no fabrication required.
Video and More Images:
Features:
-
100% CAD design with 3D CAD files directly from the manuf. to ensure proper fitment and maximum travel
-
Insanely increased ride quality on and offroad
-
Completely bolt on kit, NO welding, cutting or grinding required, able to be put back to stock.
-
Upper & Lower boxed control arms. We will not sacrifice quality for inexpensive tubing used on a upper control arm.
-
3/4 Rod ends used on upper arm inner pivots with stainless spacers for ultimate adjustability and strength.
-
All grade 9 hardware
Specs:
-
0-3" of lift adjustable for the low Prerunner look
-
13" Wheel travel
-
2.5" wider per side
Parts Included:
-
Boxed Upper control arm (eliminating balljoints & bushings)
-
Boxed Lower control arm
-
Coil bucket shock adapter. Made for 1.5" width shock
-
Hardware Kit; Heims, Monoballs, Misalignments
-
Steering kit (Rod ends for outer pivot on knuckle, Alum extension, and hardware)
Product Details:
-
Item # F12P0408
-
Brand: Baja Kits
-
Make, Model & Year
-
2004 Ford F-150 2WD
-
2005 Ford F-150 2WD
-
2006 Ford F-150 2WD
-
2007 Ford F-150 2WD
-
2008 Ford F-150 2WD
-
Availability: Available
-
Condition: New
Product Requirements:
-
Level 1 Installation (100% Bolt on with no welding, drilling or grinding required)
-
Tire 35" maximum, 37" is achievable with Fiberglass
-
Fiberglass is NOT required but recommended for offroad use
-
17" Wheels must not have more than 5" backspacing
-
Coilover Shock 2.5x6" stroke (Shock requirements below)
-
Compressed dimension 14". Extended dimension 19.5"
-
17" Hose remote with 45deg fitting.
-
Coils - 3"x14" long by 700lb for a 2.5" Coilover
|
