|
Description:
Well here it is Baja Kits is the first to uprgrade the Ford F150 Raptor suspension. We start by eliminating all stock Ford Raptor suspension components and installing our new completely CAD engineered Boxed sheet metal upper control arms, Boxed sheetmetal lower control arms (Not cast aluminum like stock), add a custom fabricated upright with 1.5" massive lower uniballs on the lower control arm and 1" 4130 uniballs on the upper control arm. We replace the current Coilover with a KING Coilover & KING 2.5" Bumpstop for those extra hard hits.
Video and More Images:
Features:
-
100% CAD design with 3D CAD files directly from the manuf. to ensure proper fitment
-
Ride quality unparalled offroad. It does have onroad manners but not it's primary objective when designing this kit
-
Upper & lower boxed control arms with custom fabricated upright. We will not sacrifice strength or quality by using a tubular upper control arm
-
1" aircraft uniballs in all 4 lower inner pivots
-
1.5" uniballs used on outer lower pivot
-
Full Heim steering
-
All grade 9 hardware
Specs:
-
2"-4" of lift
-
16" Wheel travel
-
2" wider per side
Parts Included:
-
Boxed Upper control arm (eliminating balljoints & bushings)
-
Boxed Lower control arm (using 1" uniballs on inner pivot & 1.5" on outer)
-
Custom Fabricated upright (Fits stock hub & Caliper)
-
Shock box (Custom sheetmetal shock mount)
-
Hardware Kit; Heims, Monoballs, Misalignments
-
Steering kit (Stainless billet clevis that bolts onto rack, New tie rod with heims)
-
Limit Straps
-
Steel braided brake lines
-
Any necessary tabs for relocation of engine bay items like wiper fluid box & battery
Product Details:
-
Item # FR4R0910
-
Brand: Baja Kits
-
Make, Model & Year
-
2009 Ford Raptor F-150 4WD
-
2010 Ford Raptor F-150 4WD
-
Availability: Available
-
Condition: New
Product Requirements:
-
Level 3 Installation (Major Fabrication required, welding, grinding, and drilling.)
-
Tires up to 37" anything shorter is fine.
-
Fiberglass 4" flare at a minumum
-
Wheels 17" 4.5 - 5.5" backspacing
-
10"x 2.5" Coilover shock (Shock requirements below)
-
Compressed dimension 18.375". Extended dimension 28.375"
-
12" Hose remote with 90deg fitting pointing up
-
Coils Top coil - 4" long by 550lb Bottom coil 18" long by 700lb
-
10" x 2.5" Bypass shock (Not required but highly suggested)
-
Compressed dimension 18.375". Extended dimension 28.375"
-
2 Tube bypass only. Tubes need to be clocked 90deg to shock bolt.
-
2.5" width x 2" stroke bumpstop (Not required but highly suggested)
-
Bumper custom fabricated (Necessary for maximum travel)
|
