|
Description:
Well here is the ultimate in Ford F150 Long travel suspension. This kit was made for racing purposes, so if you're looking for something that can do it all here it is. This is as close as it gets to trophy truck without starting with a complete tube chassis. We use the factory pivots to make for an easy installation for a true fabricator. Everything has been pre-engineered in CAD to get you the maximum travel and geometry. We even include necessary tabs to re-locate the wiper fluid box, battery and coolant overflow so you get the maximum up travel without having to figure it out for yourself.
Video and More Images:
Features:
-
100% CAD design with 3D CAD files directly from the manuf. to ensure proper fitment
-
Ride quality unbeatable offroad. It does have onroad manners but not it's primary objective when designing this kit.
-
Upper & lower boxed control arms with fabricated upright. We will not sacrifice strength or quality by using a tubular upper control arm
-
1" aircraft uniballs in all 4 lower inner pivots
-
1.5" uniballs used on outer lower pivot
-
Full Heim steering
-
All grade 9 hardware
Specs:
-
4"-6" of lift
-
16" wheel travel
-
4" wider per side
Parts Included:
-
Boxed Upper control arm (eliminating balljoints & bushings)
-
Boxed Lower control arm
-
Coil bucket shock adapter. Made for 1.5" width shock
-
Hardware Kit; Heims, Monoballs, Misalignments
-
Steering kit (Rod ends for outer pivot on knuckle, Alum extension, and hardware)
Product Details:
-
Item # F14R0408
-
Brand: Baja Kits
-
Make, Model & Year
-
2004 Ford F-150 4WD
-
2005 Ford F-150 4WD
-
2006 Ford F-150 4WD
-
2007 Ford F-150 4WD
-
2008 Ford F-150 4WD
-
Availability: Available
-
Condition: New
Product Requirements:
-
Level 3 Installation (Major Fabrication required, welding, grinding, and drilling.)
-
Tires up to 37" anything shorter is fine.
-
Fiberglass 4" flare at a minumum
-
Wheels 17" 4.5 - 5.5" backspacing
-
10"x 2.5" Coilover shock (Shock requirements below)
-
Compressed dimension 18.375". Extended dimension 28.375"
-
12" Hose remote with 90deg fitting pointing up
-
Coils Top coil - 4" long by 550lb Bottom coil 18" long by 700lb
-
10" x 2.5" Bypass shock (Not required but highly suggested)
-
Compressed dimension 18.375". Extended dimension 28.375"
-
2 Tube bypass only. Tubes need to be clocked 90deg to shock bolt.
-
2.5" width x 2" stroke bumpstop (Not required but highly suggested)
-
Bumper custom fabricated (Necessary for maximum travel)
|
