|
Description:
Build it yourself front A-arm suspension for your Baja bug, 4 seat prerunner, sandrail or Sandcar. We had so many calls for racecar suspensions we decided to make a suspension setup for the "Do it Yourselfers". So we did all the engineering, made the fixtures, and put all of our knowledge together from our racing background and voila. Here you have a fully engineered front suspension kit at a reasonable price for you or your fabricator to build their own chassis around in any configuration you can think of. This can easily fit a 2 or 4 seater configuration chassis or truck with I-beams that you would like to swap our to A-arms.
Video and More Images:
Features:
- 100% CAD engineered for maximum travel and minimum bumpsteer throughout the entire suspension cycle
- A-arm design for maximum leg room and shock packaging
- All boxed suspension components for the utmost in strength and aesthetics
- Best way to get started on your project without having to figure out all the hard stuff.
- Easy points on rear of bulkhead to slip in your new chassis tubes
- Shocks sit side by side for the best of both worlds with low speed tuning and maximum high speed
Specs:
- 90" wide
- 24" of front wheel travel
- 3" Ground clearance at full bump
- 7-8 degrees of rake
Parts Included:
- Completely boxed Front bulkhead with upper and lower arm mounts. (Does not include steering rack but accepts, Howe 2.5, Fortin or ProAm)
- Fully Boxed Upper control arm
- Fully Lower control arm
- 2" Hollow upright with weld on snout & spindle nuts included (Hubs, brakes, not included)
- Hardware Kit; 4 - 3/4" Heims with misalignments, 4 - 1" Monoballs with misalignments, 8 - Delrin Bushings with 4130 crush sleeves
- All Grade 9 Hardware for suspension with SAE washers & Stover nuts
Product Details:
- Item #BFE-BB4S
-
Brand: Baja Kits
-
Availability: In stock = 1 week to assemble for delivery
-
Condition: New
Product Requirements:
- Major Fabrication, this is only the front suspension setup. You must fabricate chassis and upper shock mount around suspension
- You will need, Hubs, brakes, rotors & steering rack components to complete front suspension. These components are not included
- Tire Size, Optimized for 35" but will accomodate up to 39" tires
- 15" Wheels must not have more than 4.25" backspacing
- 17" Wheels must not have more than 4.5" backspacing
- Coilover Shock 2.0 or 2.5 or 3.0 with a14" stroke (Shock requirements below)
- Compressed dimension 23.25". Extended dimension 37.25"
- Bypass Shocks 2 or 2.5 or 3.0" with a 14" Stroke.
- Compressed dimension 23.25". Extended dimension 37.25"
|
Build Your Own Sandrail or Sand Car
