|
Description:
Build it yourself Class 1 front J-arm suspension. We have had too many calls for Class 1 suspension where the customer wants to build there own chassis; so we engineered this front end in CAD specifically for you. We use all of our 3D Engineering to ensure the best fitment and geometry and let you come up with your own design for the chassis. Use all your own parts in any configuation without having to be an engineer. Great for either single seat or two seat configuration racecar.
Video and More Images:
Features:
- 100% CAD engineered for maximum travel and minimum bumpsteer throughout the entire suspension cycle
- J-arm design for Front engine configuration
- All boxed suspension components for the utmost in strength and aesthetics
- Best way to get started on your new Class 1 racecar suspension at a great price
- Easy points on rear of bulkhead to slip in your new chassis tubes
- Shocks sit side by side for the best of both worlds with low speed tuning and maximum high speed
Specs:
- 90" wide
- 24" of front wheel travel
- 3" Ground clearance at full bump
- 7-8 degrees of rake
Parts Included:
- Completely boxed Front bulkhead with upper and lower arm mounts. (Does not include steering rack but accepts, Howe 2.5, Fortin or ProAm)
- Fully Boxed Upper control arm
- Fully Lower control arm
- 2" Hollow upright with weld on snout & spindle nuts included (Hubs, brakes, not included)
- Hardware Kit; 4 - 3/4" Heims with misalignments, 4 - 1" Monoballs with misalignments, 8 - Delrin Bushings with 4130 crush sleeves
- All Grade 9 Hardware for suspension with SAE washers & Stover nuts
Product Details:
- Item #BFE-C1
-
Brand: Baja Kits
-
Availability: In stock = 1 week to assemble for delivery
-
Condition: New
Product Requirements:
- Major Fabrication, this is only the front suspension setup. You must fabricate chassis and upper shock mount around suspension
- You will need, Hubs, brakes, rotors & steering rack components to complete front suspension. These components are not included
- Tire Size, Optimized for 35" but will accomodate up to 39" tires
- 15" Wheels must not have more than 4.25" backspacing
- 17" Wheels must not have more than 4.5" backspacing
- Coilover Shock 2.0 or 2.5 or 3.0 with a14" stroke (Shock requirements below)
- Compressed dimension 23.25". Extended dimension 37.25"
- Bypass Shocks 2 or 2.5 or 3.0" with a 14" Stroke.
- Compressed dimension 23.25". Extended dimension 37.25"
|
Build Your Own Class 1
